Adaptive Low-Power Circuits for Wireless Communications (Hardcover)

購買商店

---

Adaptive Low-Power Circuits for Wireless Communications (Hardcover)

$2,490.00

馬上購買

---

內容描述

---

Description

Well over a billion people are currently using
cellular telephones, and this number is expected to grow to over two billion
in the next few years. It is remarkable that a device that was considered a
high-technology "toy" just a few years ago is now an indispensable feature of
modern life. One of the key reasons for this remarkable transformation is the
integration of all the radio functions of a cellular telephone onto a single
inexpensive piece of silicon. This achievement is a result of innovations in
design and process technology that allowed formerly discrete and separate
devices to be integrated onto a common substrate.
Now that this integration has been accomplished,
the next challenge is to make these radio functions adaptive to their
environment. This "adaptive" feature of wireless communications devices is
just today becoming a reality, and Adaptive Low-Power Circuits for
Wireless Communications represents one of the first comprehensive
treatments of the subject.
Adaptive radio transceivers require a
comprehensive theoretical framework in order to optimize their performance.
Adaptive Low-Power Circuits for Wireless Communications
provides this framework with a discussion of joint optimization of Noise
Figure and Input Intercept Point in receiver systems. Original techniques to
optimize voltage controlled oscillators and low-noise amplifiers to minimize
their power consumption while maintaining adequate system performance are
also provided. The experimental results presented at the end of the book
confirm the utility of the proposed techniques.
 
Table of
Contents

FOREWORD. OUTLINE. LIST OF
ABBREVIATIONS.
1 INTRODUCTION. 1.1 Why Silicon? 1.2 Why Wireless
and RF? 1.3 Why Low-Power and Adaptive RF? 1.4 Why Multistandard and Adaptive
RF? 1.5 Adaptivity Objectives. References.

2 PERFORMANCE PARAMETERS OF RF CIRCUITS. 2.1 Gain
Parameters. 2.2 Nonlinearity Parameters. 2.3 Noise Figure. 2.4 Phase Noise.
2.5 Dynamic Range. 2.6 RF Front-End Performance Parameters. 2.7 Conclusions.
References.

3 SPECTRUM-SIGNAL TRANSFORMATION. 3.1 Transceiver
Architectures. 3.2 Signal and Spectral Transformations. 3.3 Mixer-Oscillator
Models. 3.4 Image-Rejection Ratio Model. 3.5 IRR Model of Double-Quadrature
Downconverters. 3.6 Conclusions. References.

4 SELECTION OF PERFORMANCE PARAMETERS FOR
RECEIVER CIRCUITS. 4.1 System Considerations. 4.2 Independent Selection of NF
And IIP3 Specifications. 4.3 Mutually Dependent Selection of NF And IIP3
Specifications. 4.4 Equilibrium, Optimality and Equality Criteria. 4.5 Notes
on Power Consumption. 4.6 Performance Trade-offs in an RF Circuit. 4.7
Conclusions. References.

5 ADAPTIVITY OF LOW-NOISE AMPLIFIERS. 5.1
Adaptivity Phenomena of Amplifiers. 5.2 Performance Parameters of
Inductively-Degenerated Low-Noise Amplifiers. 5.3 Adaptivity Models of
Low-Noise Amplifiers 5.4 Conclusions. References.

6 ADAPTIVE VOLTAGE-CONTROLLED OSCILLATORS. 6.1
Adaptivity Phenomena of Oscillators. 6.2 An Adaptive Voltage-Controlled
Oscillator. 6.3 Phase-Noise Model of LC Voltage-Controlled Oscillators. 6.4
Phase-Noise Performance of Quasi-Tapped Voltage-Controlled Oscillators. 6.5
Adaptivity Figures of Merit of Voltage-Controlled Oscillators. 6.6 K-rail
Diagrams – Comprehensive Performance Characterization of Voltage-Controlled
Oscillators. 6.7 Oscillator Design Problem. 6.8 Conclusions. References.

7 DESIGN OF ADAPTIVE VOLTAGE-CONTROLLED
OSCILLATORS AND ADAPTIVE RF FRONT-ENDS. 7.1 An Adaptive Low-Power
Voltage-Controlled Oscillator. 7.2 A Multistandard Adaptive Voltage-Controlled
Oscillator. 7.3 Multistandard Adaptive RF Front-Ends. 7.4 Conclusions.
References.

A Real-to-Complex-to-Real
Transformation.
B Transformer-Feedback Degeneration of Low-Noise
Amplifiers.
INDEX.

---